Open Data Service, University of Southampton

Open Data Service

Opt System 100 Pecvd

Plasma Enhanced Chemical Vapour Deposition (PECVD) system for the growth of amorphous and polycrystalline Si, SiGe and Ge layers.     The layers can be doped during growth either n-type (using PH3) or p-type (using B2H6), thereby allowing p-n junctions to be formed.     Amorphous silicon uses  SiH4 for the source of silicon and CF4 & O2 for cleaning. The growth temperature is typically 250C, giving a growth rate of around 25 nm/min. Stress in the deposited layer is typically <200Mpa.     Polycrystalline silicon uses SiH4 for the source of silicon and CF4 & O2 for cleaning. The growth temperature is typically >=610C. The growth rate at 610C is ~2 nm/min and at 650C ~ 20nm/min.     Microcrystalline silicon uses  SiH4 for the source of silicon and CF4 & O2 for cleaning. The growth temperature is typically in the range 585 - 610C, giving growth rates in the range 1 - 2 nm/min.     Amorphous and polycrystalline germanium use GeH4 as a source of  Ge and CF4 & O2 for cleaning.

Facility: Clean Rooms - Nanofabrication
Part of: School of Electronics & Computer Science
Physical Sciences and Engineering
Location: New Mountbatten

Contact

LESSEY, MARK

If you have additions or corrections to a facility or equipment entry please contact your Faculty Finance Team.

Get the Data

If you're that way inclined, you can get the raw data used to create this page in various formats, as listed below.

TTLRDF/Turtle file
RDFRDF/XML file
RDF.HTMLHTML visualisation of raw data

The following open datasets were used to build this page:

Facilities and Equipment
Photographs of University of Southampton Things